BIT3713 PDF

And the aforesaid information does not form any part or parts of any quotation or contract between BiTEK and the information receiver. Further, no responsibility is assumed for the usage of the aforesaid information. BiTEK makes no representation that the interconnect of its circuits as described herein will not infringe on exiting or future patent rights, nor do the descriptions contained herein imply the granting of licenses to make, use or sell equipment constructed in accordance therewith. Besides, the product in this document is not designed for use in life support appliances, devices, or systems where malfunction of this product can reasonably be expected to result in personal injury. At last, the information furnished in this document is the property of BiTEK and shall be treated as highly confidentiality; any kind of distribution, disclosure, copying, transformation or use of whole or parts of this document without duly authorization from BiTEK by prior written consent is strictly prohibited.

Author:Shashakar Zulukus
Country:Venezuela
Language:English (Spanish)
Genre:Sex
Published (Last):9 July 2005
Pages:411
PDF File Size:13.70 Mb
ePub File Size:20.48 Mb
ISBN:840-7-62645-999-2
Downloads:79311
Price:Free* [*Free Regsitration Required]
Uploader:Kigami



And the aforesaid information does not form any part or parts of any quotation or contract between BiTEK and the information receiver. Further, no responsibility is assumed for the usage of the aforesaid information. BiTEK makes no representation that the interconnect of its circuits as described herein will not infringe on exiting or future patent rights, nor do the descriptions contained herein imply the granting of licenses to make, use or sell equipment constructed in accordance therewith.

Besides, the product in this document is not designed for use in life support appliances, devices, or systems where malfunction of this product can reasonably be expected to result in personal injury. At last, the information furnished in this document is the property of BiTEK and shall be treated as highly confidentiality; any kind of distribution, disclosure, copying, transformation or use of whole or parts of this document without duly authorization from BiTEK by prior written consent is strictly prohibited.

In the condition that aforesaid opposition is made, the receiver shall return this document to BiTEK immediately without any delay. Another built-in low frequency PWM generator provides user more flexible applications. BIT provides latched off protection feature may make the system more reliable.

Output of the error amplifier. A switch that connected to the high frequency triangle wave generator. This switch is closed while the voltage level of ISEN pin is lower than 1. An external resistor connected here may change the operation frequency of CTOSC during this switch is open.

An external capacitor connected here decides the frequency of high frequency PWM controller. With internal reference current and an external capacitor connected here, it decides the required period of starting and the timing of initialization. During reset mode, the current about 60uA will flow into the INN pin to reduce the output level of the error amplifier CMP to turn off the controller.

The protection function will be enabled after this node is charged to exceed 2. The ground pin of the device. The active high output driver. The internal circuit limits the max.

Output adjustment. Load detection pin, the abnormal load situation is detected if a less than 1. O To set the output polarity of the 2nd low frequency PWM generator. For most of the applications, to define a staring period in which period no power deliver to the load side, are necessary. In many cases, the resonance frequency of the load is varied while the load is changed. For obtaining the better performance, the operation frequency of the PWM controller must fit to the resonance frequency of the load.

If a different frequency says Fn Decemberfor normal operation. Fn FKHz Fn Note 1. The output driver frequency is the half of the ramp wave frequency. Note 2. Only verified by simulation.

Note 3. The voltages of the output drivers are pulled to GND in each off states. The power switch is driven by fixed frequency PWM controlled signal. If infrared or vapor phase heating is used and the package is not absolutely dry less than 0. Preheating is necessary to dry the paste and evaporate the binding agent. Preheating duration: 45 minutes at 45 C.

Reflow soldering requires solder paste a suspension of fine solder particles, flux and binding agent to be applied to the printed-circuit board by screen printing, stenciling or pressure-syringe dispensing before package placement. Throughput times preheating, soldering and cooling vary between and seconds depending on heating method. Typical reflow peak temperatures range from to C depending on solder paste material. Wave Soldering: BIT Conventional single wave soldering is not recommended for surface mount devices SMDs or printed-circuit boards with a high component density, as solder bridging and non-wetting can present major problems.

Manual Soldering: Fix the component by first soldering two diagonally-opposite end leads. Use a low voltage 24 V or less soldering iron applied to the flat part of the lead. Contact time must be limited to 10 seconds at up to C. When using a dedicated tool, all other leads can be soldered in one operation within 2 to 5 seconds between and C.

FENOGLIO IL PARTIGIANO JOHNNY PDF

BIT3713-SOP-G

From the participant monitor. BIT is similar shamrin monitor. OZN From the participant monitor. DDA From the participant monitor.

VALDAMAR VALERIAN MATRIX PDF

инвертор DAC-19M005 (на м/сх. BIT3713)

And the aforesaid information does not form any part or parts of any quotation or contract between BiTEK and the information receiver. Further, no responsibility is assumed for the usage of the aforesaid information. BiTEK makes no representation that the interconnect of its circuits as described herein will not infringe on exiting or future patent rights, nor do the descriptions contained herein imply the granting of licenses to make, use or sell equipment constructed in accordance therewith. Besides, the product in this document is not designed for use in life support appliances, devices, or systems where malfunction of this product can reasonably be expected to result in personal injury. At last, the information furnished in this document is the property of BiTEK and shall be treated as highly confidentiality; any kind of distribution, disclosure, copying, transformation or use of whole or parts of this document without duly authorization from BiTEK by prior written consent is strictly prohibited. In the condition that aforesaid opposition is made, the receiver shall return this document to BiTEK immediately without any delay.

FORMELSAMMLUNG MASSIVBAU PDF

BIT3713 Remove Protection

.

INVISIBLE BULLETS STEPHEN GREENBLATT PDF

您的浏览器版本过低,安全起见,建议使用谷歌、QQ、IE9以上等主流浏览器,如果是以上浏览器可切换为极速模式。

.

Related Articles